-
Home
-
Attachments
Demolition EquipmentMulti-ProcessorPowerful ShearEagle Shear-HardoxRail ShearPowerful CrusherMulti CrusherConcrete CrusherHydraulic PulverizerMagnet Type PulverizerSingel Cylinder CrusherRotating Powerful Type PulverizerShip DismantlingExcavator Magnet LiftBox Type Hydraulic BreakerTop Type Hydraulic BreakerSide Type Hydraulic BreakerCar DismantlingExcavator Clamp ArmIntelligent Handling EquipmentHydraulic Steel GrabHydraulic Log GrappleBundle ClampPower ThumbMechanical GrappleSorting GrappleClamshell BucketGrab BucketLotus GrappleBucketSkeleton BucketDredging BucketTilt BucketCompaction & Auxiliary EquipmentHydraulic Plate CompactorCompaction WheelQuick HitchRipper -
Technology
-
Manufacturing
-
News & Media
- Company News
- Industry Insights
-
About Us
- Company Profile
- Corporate Culture
- Chaiman's Message
- Milestones
- Certifications & Awards
-
Contact Us
Las Vegas, March 3, 2026 — JISAN Heavy Industry brought its demolition and material-handling attachment range to CONEXPO-CON/AGG 2026 at the Las Vegas Convention Center, meeting contractors, scrap processors and equipment dealers from North America, Europe and the Middle East.
CONEXPO-CON/AGG is held every three years and draws more than 2,800 exhibitors. For JISAN, the show was less about booth size and more about a single question our engineers hear on every job site: how many tonnes is your carrier, and what are you cutting?
What we brought
Five attachment families were on display, each matched to a specific tonnage band rather than a generic "one size fits all" spec sheet:
• Eagle Shear (JS380RT and above) — offset-blade geometry for rail, plate and structural steel where a clean, low-loss cut matters.
• Dual-Cylinder Power Shear (JSDF290–650) — 300–800 t of shear force for 30–55 t carriers; the tool most requested by ship-breaking and heavy scrap yards.
• Dual-Cylinder Crusher — concrete crushing and rebar separation in one pass, for demolition contractors working inside city limits.
• Demolition and Sorting Bucket — screening and sorting at the point of demolition, reducing truck movements on tight sites.
• Hydraulic Breaker — box and top-type hammers for primary breaking ahead of the shear.
Why contractors stopped at the booth
Three things came up again and again in conversations.
Material is declared, not implied. Shear jaws and wear parts are cut from genuine SSAB Hardox plate. JISAN has held Hardox In My Body certification since 2020 and renewed it through 2026, which means the steel grade on the certificate is the steel grade in the tool.
One-piece machining instead of welded assemblies. Most shear upper brackets are fabricated in sections and welded afterwards. JISAN welds the bracket first and machines it as a single piece, so bore alignment does not drift when the weld cools. In the field, that is the difference between a shear that stays tight after two seasons and one that starts to spread.
Warranty terms that are written down. Two years on dual-cylinder shears, one year on grapples, with an automatic one-month extension at expiry — unusual in a category where six to twelve months is the norm.
Built for four working environments
The attachments on display were selected around the applications our customers actually run:
• Scrap yards — shearing and handling mixed ferrous and non-ferrous material without moving it to a fixed shear.
• Demolition — concrete crushing with rebar separation, no blasting, no dust plume.
• End-of-life vehicle dismantling — clamp, press frame and shear working as a sequence rather than three separate machines.
• Ship recycling — high-force shears for hull plate and heavy structure, with corrosion-resistant hydraulic components for coastal yards.
Service follows the machine
JISAN equipment now works in more than 50 countries. Our service standard — internally called 10-30-8-24 — commits to a response within 10 minutes, a proposed solution within 30 minutes, a replacement part dispatched within 8 hours, and an engineer on site within 24 hours for complex faults. For export customers, spare parts and hydraulic seals are stocked against the carrier and attachment model, not ordered case by case.
Next step
If you were at the show and did not get time at the booth — or if you are matching an attachment to a carrier this season — send us your excavator model, tonnage and material type. We will come back with a recommended model, shear force figures and a delivery date, not a brochure.
JISAN Heavy Industry — demolition and material-handling attachments, manufactured in Yantai, China, since 2009.