-
Home
-
Attachments
Demolition EquipmentMulti-ProcessorPowerful ShearEagle Shear-HardoxRail ShearPowerful CrusherMulti CrusherConcrete CrusherHydraulic PulverizerMagnet Type PulverizerSingel Cylinder CrusherRotating Powerful Type PulverizerShip DismantlingExcavator Magnet LiftBox Type Hydraulic BreakerTop Type Hydraulic BreakerSide Type Hydraulic BreakerCar DismantlingExcavator Clamp ArmIntelligent Handling EquipmentHydraulic Steel GrabHydraulic Log GrappleBundle ClampPower ThumbMechanical GrappleSorting GrappleClamshell BucketGrab BucketLotus GrappleBucketSkeleton BucketDredging BucketTilt BucketCompaction & Auxiliary EquipmentHydraulic Plate CompactorCompaction WheelQuick HitchRipper -
Technology
-
Manufacturing
-
News & Media
- Company News
- Industry Insights
-
About Us
- Company Profile
- Corporate Culture
- Chaiman's Message
- Milestones
- Certifications & Awards
-
Contact Us
Most shear suppliers quote from a catalogue and then build. The result is a delivery date measured in months, and a specification that drifts between the quotation and the machine that finally arrives. For demolition and ship-breaking yards, that gap is the real cost.
JISAN keeps the four largest dual-cylinder power shears in stock at the Yantai plant, built and tested ahead of the order: JSDF400, JSDF450, JSDF550 and JSDF650. These are the models sized for carriers above 30 tonnes, where the shear is not an accessory but the primary production tool.
What is actually on the floor
• JSDF400 — the entry point for 30-35 t carriers; typical work is building frames, light ship structure and mixed scrap.
• JSDF450 — 35-42 t carriers; the volume model for end-of-life vehicle lines and general demolition.
• JSDF550 — 42-50 t carriers; heavier plate, thicker hull sections, longer continuous cutting cycles.
• JSDF650 — 50 t and above; ship-breaking and heavy structural steel, where jaw stiffness matters more than cycle speed.
Stock does not mean a compromise on configuration. Mounting brackets are machined to the carrier‘s pin dimensions, and hydraulic settings are matched to the host machine‘s flow and pressure before dispatch, so the shear arrives as a matched tool rather than a generic one.
Why stock changes the economics
A shear that arrives in six weeks instead of sixteen does three things for a yard:
• It can be booked against a contract that has already been signed, not one that is still being negotiated.
• It shortens the ramp-up period on a new carrier, because the attachment is available when the machine is.
• It removes the temptation to buy an oversized used unit "for now", which is the most common cause of cracked jaws and bent frames in the first year.
Spare jaws and wear parts
Every stocked shear ships with a spare-parts list tied to the serial number: jaw inserts, blade bolts, pivot pins and bushings. These are held as standard inventory, not made to order, because a shear that waits three weeks for a blade bolt is a shear that is not earning.
For buyers comparing quotes, the practical question is not the price of the machine. It is the date the machine can start cutting, and the lead time on the parts that will wear out. Both are answerable before the order is placed.
Considering a large shear? Tell us the carrier model, the material you cut most, and the section thickness you meet. We will confirm the right frame size and the delivery date for that specific unit.